-
PWS1503
Analytic Systems: 1500W, Input: 105-250V, Output: 12V, 24V$Call for PriceOut of stock
The Analytic Systems PWS1503 power supply provides 12 or 24VDC at 1500W of continuous power from a 110 or 220V AC source. They employ a switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Some of its features include adjustable output voltage audible and visual indicators fow input volage, low output voltage, over temperature, overload and output on. Learn More -
PWS240
Analytic Sys: 317W, Input: 100-260V, Output: 13.8V$Call for PriceOut of stock
The new Analytic Systems PWS240 power supply uses a mosfet based switchmode technology for high reliability, high efficiency and minimum size. The transistors are protected by a safe operating area circuitry and limiting current. current. Also, a crowbar circuit protects any devices powered by the unit from excessive voltage in the unlikely event of a failure. Applications includes GPS receivers, plotters, electronics displays, etc. Learn More -
PWS310
Analytic Sys: 300W, Input: 105V-250V, Output: 12V, 24V, 48V$Call for PriceOut of stock
The PWS310 provides 12V, 24V or 48VDC at 300W of continuous power from a 110 or 220V AC source. Its also has features such as an input fuse, thermal shutdown, current limiting, automatic recovery and so on. Learn More -
PWS310-x
COTS, Input: 110V, 220V, Output: 12, 24, 28, 48$Call for PriceOut of stock
The PWS310-110-24-TEL Series of COTS power supplies were designed for the TelephonicsÆ Corporation to provide 12, 24, 28 or 48 Volts DC at up to 300 Watts of continuous power from a 110 or 220 Volt AC source. Learn More -
PWS610
Analytic Sys: 600W, Input: 105-250V, Output: 12V, 24V, 48V$Call for PriceOut of stock
The PWS610 uses a switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. It is also ultra-quiet and features the lastest generatyion of current mode PWM control. Extra features include adjustable output voltage audible, and visual indicators for low input voltage, low output voltage, over temperature, overload and so on. Learn More -
PWS610R
Analytic Sys: 600W, Input: 105V-250V, Output: 12V, 24V, 48V$Call for PriceOut of stock
The PWS610R is a rackmount power supply that provides 12, 24, or 48VDC at 600W of continuous power from a 110 or 220 Volt AC source. This rackmount power supply has a depth of about 13.5in, a width of about 19" and a height of about 2u. It also features a four contact output terminal (two positive and two negative contacts) for easy connection of device to the supply, hight quality output meters to allow monitoring of output current and output voltage. Learn More -
1234
24V and 36-48V, 200 to 350A (2 Minute Rating), AC Induction Controller$587.50Features
- Vehicle Control Language (VCL)
- Configurable CANbus
- Dual Drive Capable
- Auto-Tune Motor Characterization
- Integrated System Controller
- Indirect Field Orientation (IFO)
-
-
1314
PC Programming Station Software for Curtis Controllers$665.00Features
- View and adjust controller programmable parameters.
- Real-time monitoring of system variables such as voltage, temperature, and current.
- Saves all data – parameter values, monitor values, history logs etc., in a single file.
- Edit, rename, export or print files online or offline.
- Clone data between controllers.
- View active fault codes and system timers.
- View and clear controller fault history log.
- Online help and automatic update function (with active internet connection).
-
1268
36-48V, 400A and 500A$715.00Features
- Excellent Drive and Braking Feel
- Fully Programmable
- Powerful Safety Features
- Easy to Install and Maintain
-
1210
24V, 45A or 70A$148.00Features- Ideal for Scooters & Sweeper/Scrubbers
- Especially for Economical Designs
- Great for all light industrial applications
- Quantity discounts available!
-
1211
24V, 30A or 45A$125.00- Motor Speed Controll for PM Motors
- Economical and Programmable
- Great for low cost scooter designs
- Quantity discounts available!
-
1228
24V, 36V, 70A, 110A$275.00Features
- Meets US and International Regulations
- Fully Programmable
- Ideal for Scooter and Small EV's
- Factory Certified Rebuilds Available with 1 Yr Warranty, 1 Week Lead-time (See Model Drop-down List)
-
enAble 40 Series: 1740,1741,1742
24V, 50 or 75A, enAble40 for Powerchairs$Call for PriceOut of stock
- Powerbase for the enAble40 Powerchair System
- Hand and Attendant Controls Available
- Light and Actuation Options
- EN 12184, EN 55022 and IEC 801 Compliant
- FDA Documentation Filed
- TÜV Certified
-
S362x
High Temperature Sensor, Operating Dist: 5, 15mm, PTFE, etc$303.00These high temperature sensors have an amplifier completely separate from the sensor. This allows the sensor to withstand temperatures from -200 to +250C (-382 to +482 F). The sensors are available in 18mm and 30mm diameters and made of stainless steel and PTFE. Each sensors operating distance is adjustable. This sensitivity regulation is useful in applications such as detection of full containers and non-detection of empty containers. Other applications include the level control of hot materials such as liquids, oils, powder and plastic granules. Learn More -
S5000
18mm Diameter Sensor$97.00Features
- Short circuit & reverse polarity protection
- Protection degree IP65
- LED function indicator
- 5 and 10 meter cable lengths available upon request
-
S514x
NO/NC Programmable Sensor, Operating Distance: 0-25mm, etc$Call for PriceOut of stock
The S514x is a capacitive sensor which are used to detect metallic and non-metallic objects. These capacitive sensors have a normally open or normall closed output selector switch and can operate on a wide voltage range 20-250V AC/DC. This greatly reduces the need to keep multiple sensors in stock. They are dust and water tight as well as stock and vibration resistant. All model features an LED indication of the output status, protective housing, adjustable operating distance, AC/DC power supply, and so on. Learn More -
S51xx
30mm Sensor, Operating Distance: 0-25mm, DC, Brass, Plastic$53.00The 51xx is a 30mm capacitve proximity sensor that can used for non-contact detection of metallic objects and non-metallic objects(liquid, plastic, wooden materials and so on). They do so by using the variation of capacitance between the sensor and object being detected. The 51xx comes with features such as short circuit and reverse polarity protection, protection degree IP65, LED function indicator. Various cable lengths are available upon request. Learn More -
S315x
Sensing Head Sensor, Operating Dist: 10-60mm, DC, AC, Plastic$77.50The S315x are large rectangular-shaped inductive sensors. They usually come with the following features such as a sensing head that can be oriented in 5 different, short circuit and reverse polarity protection, LED function indication, protection against water jets and so on. Most of the 4-wire DC models have both NO and NC outputs, while the 2-wire AC and DC models are NO or NC programmable. Learn More -
S7x1
Analog Current Sensor, Operating Dist: 0.1-6mm, DC, Brass$89.00The S7x1 is an Analog current sensor that operates as a current generator. The load is usually supplied with constant current and is dependent upon the distance between a metal target and the sensor. S7x1 are usually used in application such as the control, detection, position, inspection and automation of machine tools and manufacturing systems. They can also be used in the following machinery: food processing, ec and anywhere non-contact displacement measurement of metal is needed. The S7x1 comes with features such as reserve polarity protection, shock and vibration resistance, non-contact distance measurement of metallic object, analog current output, and so on. Learn More
Tecknowledgey, Inc, 8 John Walsh Boulevard, Peekskill, NY 10566, Phone: 914-739-4499, Fax: 914-739-559