-
ET-126MCU
Output range: 0 to 5V$155.00Features
- Hall effect sensors and solid state MOSFET contactor drivers
- Symmetrical throttle response in both forward and reverse
- Minimal deadband areas at both zero and full throttle positions
- Environmental protection of major components
- Wig-wag type throttle returns the throttle to neutral
-
98191
Potentiometer: 0 to 5K Ohms, Electrical Travel: 45 degrees (Curtis Instruments)$32.95Curtis Instruments 98191 0 to 5K ohm potentiometer with 0 to 45 degree throw range. Same potentiometer used in the Curtis PB series throttles.
In stock for immediate shipping while supplies last!
Learn More -
FP-5
Footpedal: Output range: 0 to 5K Ohms$270.50A rugged footpedal throttle assembly for use with Curtis PMC electronic motor speed controllers, and models by other manufacturers. Learn More -
FP-6E
Footpedal: Output range: 0 to 5K Ohms$172.75Features
- Rugged LM24 Aluminum Casing
- Flexible Installation Options
- Cable Exits Rear for Easy Instatlation
- 5K Ohm Potentiometer
- Pedal can be Mounted on Either Side
- This model replaces the FP-6D
-
PB
Curtis: Potbox, Operation-hand = (Left, Right)$125.00A rugged spring arm throttle assembly for use with Curtis PMC electronic motor speed controllers, and models by other manufacturers. Learn More -
WW
WigWag, 0-5K Ohm, Spring Torque: 20Ncm±3Ncm and 33Ncm±3Ncm$84.75Features
- Long cycle life (>3,000,000)
- Self contained & compact package
- Easy mechanical installation
- Easy electrical connections
- No mechanical adjustments
- No electrical calibrations
- Easy actuating lever orientation
- Positive actuating lever attachment
-
-
201PC
Digital Hour Meter PCB Mountable with Serial Output and No Display$61.95Curtis Instruments commercial PCB mounted hour meter with serial output. Records the service time that power has been applied up to 99,999.99 hours. Requires a Tecknowledgey model 1170-007 hand held reader to display hours. Tecknowledgey's 701PC is a compatible drop-in replacement.
Learn More -
-
700P
Module (PCB Only, No Case)$32.50 -
732
5mm Digits, Advisory LED Indicator, K or N Case Only$36.00Highly reliable solid state hour meter with high intensity advisory LED that offers an unprecedented combination of performance, reliability and value. Learn More -
CH-7
Counter: Battery Powered 7 Digit LCD with Reset$35.95Battery Powered Counters are panel mount counters powered by a small, lithium battery. Under standard operation, they have a life expectancy of 10 years. The front reset button can be disabled if desired. Learn More -
CSI-E300-100
CSI Part #: E300-50, 300A, 100mV, +- 0.5% Accuracy$Call for PriceOut of stock
Thermovolt shunts offer the highest quality possible at the best possible price. What makes Thermovolt unique is the use of manganin rods, which are silver soldered to copper terminal blocks and nickel plated. Standard blade shunts cannot compare to Thermovolt's price, quality and performance standards Learn More -
CSI-E400-100
CSI Part #: E400-50, 400A, 100mV, +- 0.5% Accuracy$Call for PriceOut of stock
Thermovolt shunts offer the highest quality possible at the best possible price. What makes Thermovolt unique is the use of manganin rods, which are silver soldered to copper terminal blocks and nickel plated. Standard blade shunts cannot compare to Thermovolt's price, quality and performance standards. Learn More -
CSI-E500-100
CSI Part #: E500-50, 500A, 100mV, +- 0.5% Accuracy$Call for PriceOut of stock
Thermovolt shunts offer the highest quality possible at the best possible price. What makes Thermovolt unique is the use of manganin rods, which are silver soldered to copper terminal blocks and nickel plated. Standard blade shunts cannot compare to Thermovolt's price, quality and performance standards. Learn More -
CSI-E600-100
CSI Part #: E600-50, 600A, 100mV, +- 0.5% Accuracy$Call for PriceOut of stock
Thermovolt shunts offer the highest quality possible at the best possible price. What makes Thermovolt unique is the use of manganin rods, which are silver soldered to copper terminal blocks and nickel plated. Standard blade shunts cannot compare to Thermovolt's price, quality and performance standards. Learn More -
CSI-E800-100
CSI Part #: E800-50, 800A, 100mV, +- 0.5% Accuracy$Call for PriceOut of stock
Thermovolt shunts offer the highest quality possible at the best possible price. What makes Thermovolt unique is the use of manganin rods, which are silver soldered to copper terminal blocks and nickel plated. Standard blade shunts cannot compare to Thermovolt's price, quality and performance standards. Learn More -
CSI-E1000-50
CSI Part #: E1000-50, 1000A, 50mV, +- 0.5% Accuracy$Call for PriceOut of stock
Thermovolt shunts offer the highest quality possible at the best possible price. What makes Thermovolt unique is the use of manganin rods, which are silver soldered to copper terminal blocks and nickel plated. Standard blade shunts cannot compare to Thermovolt's price, quality and performance standards. Learn More -
CSI-E1200-50
CSI Part #: E1200-50, 1200A, 50mV, +- 0.5% Accuracy$Call for PriceOut of stock
Thermovolt shunts offer the highest quality possible at the best possible price. What makes Thermovolt unique is the use of manganin rods, which are silver soldered to copper terminal blocks and nickel plated. Standard blade shunts cannot compare to Thermovolt's price, quality and performance standards. Learn More -
CSI-E400-50
CSI Part #: E400-50, 400A, 50mV, +- 0.5% Accuracy$Call for PriceOut of stock
Thermovolt shunts offer the highest quality possible at the best possible price. What makes Thermovolt unique is the use of manganin rods, which are silver soldered to copper terminal blocks and nickel plated. Standard blade shunts cannot compare to Thermovolt's price, quality and performance standards. Learn More
Tecknowledgey, Inc, 8 John Walsh Boulevard, Peekskill, NY 10566, Phone: 914-739-4499, Fax: 914-739-559